Oil-based mud is a drilling fluid used in drilling engineering. It is composed of oil as the continuous phase and water as the dispersed phase in conjunction with emulsifiers, wetting agents and gellants. The oil base can be diesel, kerosene, fueloil, selected crude oil or mineral oil. –wiki
Removing Mud Solids
A field method for measuring solids sizes on the job. It is simple and easy to use and should improve the efficiency of solids control. There will be some sacrifice in accuracy; however, only the relative weight percentage distribution of the particles is needed to allow constructive steps to remove these particles.
Field Applications of PHPA Muds
The application of polymer muds has been hindered by two criticisms. First, they are difficult to run because mud-engineering maintenance guidelines are very different from conventional bentonite mud systems. Second, they are less solids-tolerant than dispersed or lime-based systems. Consequently, these muds often have proved uneconomical for drilling geologically young and highly dispersive shales or for drilling with high mud weights (greater than 14 lbm/gal [greater than 1700 kg/m3]).
SOLIDS CONTROL EQUIPMENT FOR WEIGHTED MUDS
Weighted muds are the ones that contain weighting materials. These mud systems are usually used for drilling at deeper depths because of increasing formation pressures. The typical composition of weighted clay/water mud is active clay, and inert solids like barite are used for enhancing the mud weight. As mentioned earlier, the mud arriving at the surface from the bottom while drilling is in progress contains active and inactive drilled solids. Hence, the low gravity solids must be removed first, using a screen, because their disintegration reduces the particle size to less than that of barite or in the similar range. This may cause a loss of costly barite if the mud is subjected to solids control. Once the larger particles are removed the mud must be passed through mud cleaner, where the hydrocyclones are used in series with screens. This system works best for muds with density less than 15.0 lbm/gal.
Continue reading “SOLIDS CONTROL EQUIPMENT FOR WEIGHTED MUDS”