Solids Control Equipment for an Un-weighted Drilling Fluid System

The un-weighted muds are the ones that do not contain any weighting materials such as barite or lead sulfide. This is the type of mud that is usually used for drilling shallow formations. The cuttings comprise active solids like clay that hydrate and inert solids like sand, silt, limestone, feldspar and small quantity ofAmerican Petroleum Institute (API) barite. Apart from the API barite which may be used for density control, the other solids are abrasive, and tend to increase frictional pressure loss during fluid flow, increase viscosity and form thick permeable cakes. This may lead to stuck-pipe, excessive torque and drag, lost circulation, and poor cementation. The inert solids are removed from the drilling fluids by using solids control equipment like shale shaker, desanders, desilters (hydrocyclones and decanting centrifuges) in that order. The active solids, like clays, are removed by using chemical flocculant or by diluting the fluid with water.

Continue reading “Solids Control Equipment for an Un-weighted Drilling Fluid System”

Evaluate The Efficiency Of Solids Control Equipment

The volume and type of solids in a drilling mud system can adversely affect mud properties, reduce penetration rates, cause damage to drilling equipment, and increase total drilling costs. Efficiency controlling the solids content of the mud system is an important phase of an efficient and cost-effective drilling program. The three basic methods of removing solids are dilution and/or displacement of whole mud, settling and mechanical solids-control equipment.

Fig 1. Size capacity and operating of solids control equipment

Continue reading “Evaluate The Efficiency Of Solids Control Equipment”

Solids Control Through Economic Evaluation of Mechanical Equipment

Proper application and utilization of mechanical solids control equipment enables the driller to maintain the desired drilling fluid properties which in turn makes it possible for the drilling operation to be carried out in an efficient and possible for the drilling operation to be carried out in an efficient and economical manner.

Catagory of main solids control equipment

Continue reading “Solids Control Through Economic Evaluation of Mechanical Equipment”